Mechanical cleaning/degreasing

Different cleaning products

Because there are various sources of contamination, there are also different categories of cleaning products. Acid cleaning agents are mainly used for the removal of lime and rust. Alkaline cleaning products (with a high PH-value) are very suitable for degreasing metals. Our anti-foaming agents ensure the control of foaming detergents. Do corrosion problems occur on parts in steel? Then consider the use of our anti-corrosion agents. Or contact us for advice on industrial cleaning according to requirements.

CTEC cleaning products for various applications

CTEC offers a variety of degreasing products. In our range you will find degreasing products for degreasing metal, in particular for degreasing copper, steel, aluminium, oil and grease, but also as preparation for the coating process. We offer the most effective industrial degreaser for any degreasing problem.

Our cleaners for mechanical cleaning and degreasing:

CTEC c1.01

View all details

Aqueous cleaner to descale and clean all ferrous metals in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
Also suitable as a machine cleaner to remove lime, minerals, salts, and residues from the chemistry that is used inside the machine.
pH: 0.1 (acid).

CTEC c1.02

View all details

Aqueous cleaner to clean plastic parts or for the light etching of metals in a spray pressure washer, wash tunnel or brush cleaning machine.
pH: 4.0 (acid).

CTEC c2.01

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
pH: 6,0 (neutral).

CTEC c3.02

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleaning machine, wash tunnel or brush cleaning machine.
pH: 12,3 (alkaline).

CTEC c3.04

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
pH: 13,6 (alkaline).

CTEC c3.05

View all details

Aqueous cleaner to clean all metals, both ferrous and non-ferrous, in a spray pressure washer, wash tunnel or brush cleaning machine. Excellent pretreatment for coatings.
Besides that, copper and brass are unaffected when cleaning and therefore do not change color. Also an excellent passivating product.
pH: 10.6 (alkaline).

CTEC c3.07

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
Ideally suited as preparation for the painting process.
pH: 12,5 (alkaline).

CTEC c3.08

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in an ultrasonic cleaning system.
pH: 11,7 (alkaline).

CTEC c4.02

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
pH: 13,2 (caustic soda).

CTEC c4.04

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
pH: 12,2 (caustic soda).

CTEC PAS 01

View all details

Anticorrosive product.
This product is used when there are corrosion problems on parts in stainless steel, steel and galvanized steel.

CTEC PAS 02

View all details

Anticorrosive product.
This product is used when there are corrosion problems on metal parts.

CTEC PAS 03

View all details

Anticorrosive product.
This product is used when there are corrosion problems on parts in steel.

CTEC cAS02 NSIL

View all details

Surface-active defoamer.

CTEC cAS03

View all details

Oil based defoamer.

CTEC cAS01 SIL

View all details

Silicone based defoamer.

LX 2025

View all details

Heavy duty solvent free degreaser for general industrial maintenance where light corrosion inhibitor is needed. Applicable on ferro and non ferrous. Suitable for the cleaning of crude oils, grease deposits, carbonaceous residues. Used warm for heavy applications and to speed up degreasing working and drying time.

CTEC c3.01

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
pH: 10,2 (alkaline).

CTEC c3.03

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleanig machine, wash tunnel or brush cleaning machine.
pH: 12,8 (alkaline).

LX 300

View all details

Neutral, odorless and clear degreasing fluid for cold-degreasing, especially developed for the metal-working and electro-technical industries, for the removal of oils, fatty matter, soil, cutting and drilling oils from metal objects, sheet metal, parts of engines and machinery, mechanical equipment, electrical and electronic equipment, electro engines, etc.

LX 700

View all details

Odourless and cheap degreasing liquid that can be used for cold degreasing in metalworking and electro-technical industries for the removal of oils, fatty matter, soil, etc. from metal objects, parts of eninges and machinery, electrical and electro-technical equipment, etc.

LX 1300

View all details

Powdery, mild alkaline detergent, which removes difficult, pigment contenting dirt, and which is, nevertheless, safe for sensitive metals.

LX 1400

View all details

Single-phase liquid alkaline degreaser for the cleaning and degreasing of parts in industrial cleaners. The product degreases steel and aluminum.

CTEC c3.11

View all details

Aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleaning machine, wash tunnel or brush cleaning machine. In short, it is suitable for use in a machine with a strong agitation.
pH: 10,2

Need help with your cleaning problem? Contact us by e-mail or call +32 (0)14 86 16 13